AEG Electrolux EMW2000 - Program Selector Functionality

- 16 -
TSE-N 01.03 A.B. 599 50 75 69 EN
C1C2C3
C5C4C6
Program Selector
The program selector includes the on/off function and the wash programs. The on/off function is
controlled by the contacts P1/P2, P3 and P7/P5, P6.
The program selector has 12, 21 or 24 positions, depending on the appliance model. Every wash cycle
has an own binary code which is transmitted to the input/output electronic.
The control signal can be taken from the following diagram.
3URJUDPVHOHFWRU %LQDU\&RGH +H[DGHFLPDO
SRV SRV SRV & & & & & &RGH
    )
    &
    
    
    
    $
    
    
    
    (
    
    $
    
    
    
    %
    
    %
    
    '
    
    
    
    
www.mosogepszerviz.info