To Next PageTo Next Page
Need help?Do you have a question about the AEG Electrolux EMW2000 and is the answer not in the manual?
General| Child Lock | Yes |
|---|---|
| Dimensions (H x W x D) | 850 x 600 x 540 mm |
| Programs | Cotton, Synthetic, Delicates, Quick Wash |
| Delay Start | Yes |
| Display Type | LED |
Details on display functions, start/pause, and delayed start buttons.
The main electronic control unit managing appliance functions.
The main drive motor for the drum.
Component responsible for heating the wash water.
Safety mechanism ensuring the door is locked during operation.
Pump responsible for removing water from the tub.
System that positions the drum correctly for loading/unloading.
Details the heating circuit, NTC sensor, and temperature control for wash programs.
Describes the motor's rotary direction, speed control, and relay functions.
Step-by-step guide to removing and replacing the main circuit board.
Explains how faults are indicated via display or cycle run LEDs as binary codes.
Details how error codes are composed from LED valencies and provides examples.
Comprehensive list of fault codes, their types, remedies, and alarm codes for diagnosis.
Continues the list of fault codes, remedies, and alarm codes, including E60-E94 series.
Maps cycle run LEDs to binary codes and valencies for fault indication.
Demonstrates how to interpret error codes using LED flashing patterns.
Guides on accessing, changing, and saving the appliance configuration code.
Explains where to find the configuration code and its importance for new electronics.
Demonstrates how to read the configuration code using LED indicators based on an example.
Shows the electrical connections between all components of the washing machine.
Illustrates the functional electrical connections and signal flow between components.
Detailed steps for disassembling the door lock mechanism.
Guides on correctly assembling the door lock and splash protection.
Procedures for disassembling and reassembling the electronic module.
Instructions for removing the drain pump, including notes on broken clips.
Steps for removing the motor, including drive belt and connections.
Guides for disassembling and assembling the left and right bearings, including lubrication.
Procedure for disassembling the drum support positioning (DSP) unit.
