Service-Bulletin
DGS-TDS-N © Electrolux
01.08.07
599 530 217
Washing machines EN
Toploader
1. Noises at the side panel
Cause: Side panels are vibrating and become loose.
Measure: Remove side panels and stick in 3 foam parts each, No. 146277000/7.
foam part
2. Transfer of vibrations through the floor
Cause: Vibrations on the floor may be transferred during the spinning cycle.
Measure: Put the washer onto rubber dampers (No. 5028378200/6) in the front (below both feet) and
at the rear (below both rollers)..
To Next Page