Example:
ð For example, with error E40 only the main wash LED would flash
ð If error E93 is indicated Pre-Wash, Rinse +, End and Overdosed will flash.
The error code is composed of the following valencies:
LED Valency
pre-wash 8
rinse + 1
total 9
end 2
overdosed 1
total 3
F With the previous tables you are now able to determine the meaning of the individual error
codes.
LED OFF
LED ON
Service Program
Fault indication by display or cycle run display.
In appliances which have no indication display faults can be indicated by the cycle run LEDs as a binary
code.
pre-wash
main wash
rinse
rinse +
spin
drum position
end
overdosed
cycle run LEDs
LEDs
valency
LEDs
valency
To Next Page
Loading...
