EasyManua.ls Logo

AEG Electrolux EMW2000 - Page 58

AEG Electrolux EMW2000
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 4 -
TSE-N 01.03 A.B. 599 50 75 69 EN
Pre-Wash Button
Function:
- This button is effective in the cycles cotton/colored wash, easy care and delicate fabrics.
- Cannot be combined with the stains button.
- It is heated up to max. 30° C.
Soak Button
Function:
- To activate the soaking it is necessary to select a wash program.
- This can be done in the cycles cotton/colored wash, easy care and delicate fabrics.
- The soaking takes 30 min and another approx. 25 min of pre-wash time will be added.
- It is heated up to 30 °C.
- Cannot be combined with the pre-wash button.
- The soak time can be extended to max. 10 h by the delayed start button.
- After the start the extended soak time will be added to the duration of the soak cycle and indicated
in the display in minutes.
- After soaking it is drained automatically and the previously selected cycle will be executed.
Short Button
Function:
- This button is effective in the cycles cotton/colored wash, easy care and delicate fabrics.
Besides with cotton/colored wash E60° and E40°.
- Cannot be combined with the stains button and the ECO cycles.
Stains Button
Function:
- This button is effective in the cycles cotton/colored wash, easy care and delicate fabrics.
The selected temperature however must be >=40°C.
- Separate rinsing in of stain remover through the pre-wash chamber, approx. 1.2 ltrs.
- Cannot be combined with the pre-wash button.
- Extends the cycle duration in the main wash by 10 minutes after the first heating to 40°C.
Spin Deselection Button
Function:
- The spinning speed can be reduced to zero step-by-step by pressing this button.
Easy Iron 40°
Function:
- The cycle run is similar to that of the easy care cycles.
- The max. load is 1 kg.
- The reverse mechanic is reduced by 2 1/min.
- There is no intermediate spin.
- There is an automatic cool-down phase with approx. 8 ltrs.
Activation and Deactivation of the Signal
Function:
- Switch on the appliance. The signal indicating the end of the cycle is activated and/or deactivated
by pressing the pre-wash button and either the stains or the spin deselection button
simultaneously.
     ULQVHKROG
     ULQVHKROG
    ULQVHKROG
    ULQVHKROG 
   ULQVHKROG 
www.mosogepszerviz.info

Related product manuals