The Child Lock function may not be available for a few seconds
after switching the appliance on.
8.4 Operating Hours Counter
It is possible to visualise the total operating time of the appliance in
hours, starting from the first switching on. This value will count
operating time of the cycles (does not include pauses, delayed start
time). To visualise this value, proceed as follows:
1. Switch the appliance on by pressing the Ein/Aus button.
2. Press and hold the Extra Spülen and Plus Dampf buttons for
some seconds.
3. After 3 seconds the total hours operated by the appliance are
shown in the display: e.g. 1276 hours, the display shows the text
Hr for 2 seconds, 12 (thousands and hundreds) for 2 seconds
and 76 (tens and units).
4. To exit this mode, press any button or switch the appliance off by
means of theEin/Aus button.
If the procedure does not work (due to timeout or wrong keys
combination), switch the appliance off and repeat sequence
from the beginning.
8.5 Factory Defaults
This function allows to restore the factory default options. To
activate this option follow steps below:
1. Switch the appliance on by pressing Ein/Aus button.
2. Press and hold the Flecken/Vorw. and Zeit Sparen buttons for
some seconds.
3. The display will show
for about 5 seconds.
38/96
SETTINGS
To Next Page
Loading...
