11. DAILY USE
WARNING!
Refer to Safety chapters.
11.1 Activating the appliance
1. Connect the mains plug to the mains socket.
2. Open the water tap.
3. Press the Ein/Aus button for a few seconds to activate the
appliance.
A short tune sounds. The appliance automatically proposes a
default programme. The relevant indicator illuminates.
The display shows the cycle duration, the maximum load (for a few
seconds), the default temperature, the default spin speed and the
indicators of the phases making up the programme.
11.2 Loading the laundry
1. Open the appliance door.
2. Shake the items before you put them in the appliance.
3. Put the laundry in the drum, one item at a time.
Make sure not to put too much laundry in the drum.
4. Close the door firmly.
CAUTION!
Make sure that no laundry stays between the seal and the door.
There is a risk of water leakage or damage to the laundry.
52/96
To Next Page
Loading...
