EasyManua.ls Logo

AEG LR8E70480 - Cleaning the Inlet Hose and the Valve Filter

AEG LR8E70480
96 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11.Put the filter back into the special guides by turning it clockwise.
Make sure that you tighten the filter correctly to prevent
leakages.
2
1
12.Close the pump cover.
2
1
When you drain the water with the emergency drain procedure, you
must activate the drain system again:
a. Put 2 litres of water in the main wash compartment of the
detergent dispenser.
b. Start the programme to drain the water.
13.10 Cleaning the inlet hose and the valve filter
It is recommended to clean both the filters of the inlet hose and
valve occasionally to remove any deposit, collected over the time:
1. Remove the inlet hose from the tap and clean the filter.
77/96
CARE AND CLEANING

Table of Contents

Related product manuals