14. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
14.1 Alarm Codes and Possible failures
The appliance does not start or it stops during operation. First try to find a solution to the problem
(refer to the tables).
WARNING!
Deactivate the appliance before carrying out any check.
With some problems, the display shows an alarm code and the Start/
Pause button may flash continuously:
If the appliance is overloaded, remove some
items from the drum and/or keep pressed the
door while touching the Start/Pause button until
the indicator stops flashing (see the picture
below).
Problem Possible solution
80/96
To Next Page
Loading...
