The appliance
does not fill
with water
properly.
• Make sure that the water tap is open.
• Make sure that the pressure of the water
supply is not too low. For this information,
contact your local water authority.
• Make sure that the water tap is not clogged.
• Make sure that the inlet hose has no kinks,
damages or bends.
• Make sure that the connection of the water
inlet hose is correct.
• Make sure that the filter of the inlet hose and
the filter of the valve are not clogged. Refer
to 'Care and cleaning'.
The appliance
does not drain
the water.
• Make sure that the sink spigot is not clogged.
• Make sure that the drain hose has no kinks
or bends.
• Make sure that the drain filter is not clogged.
Clean the filter, if necessary. Refer to "Care
and cleaning".
• Make sure that the connection of the drain
hose is correct.
• Set the drain programme if you set a pro‐
gramme without drain phase.
• Set the drain programme if you set an option
which ends with water in the tub.
81/96
TROUBLESHOOTING
To Next Page
Loading...
