The appliance
door is open or
not closed cor‐
rectly.
• Make sure that the door is properly closed.
Internal fail. No
communication
between elec‐
tronic elements
of the appli‐
ance.
• The programme was not finished properly or
the appliance stopped too early. Switch the
appliance off and on again.
• If the alarm code appears again, contact the
Authorised Service Centre.
The anti-flood
device is on.
• Disconnect the appliance and close the wa‐
ter tap. Contact the Authorised Service Cen‐
tre.
If the display shows other alarm codes, deactivate and activate the
appliance. If the problem continues, contact the Authorised Service Centre.
In case of different problem with the washing machine check the table below
for possible solutions.
82/96
TROUBLESHOOTING
To Next Page
Loading...
