43
6.3 LCD description
The LCD backlight automatically dims after 2 minutes of inactivity (except
UPS is fault). Press any button to wake up the screen.
The UPS status display is divided into several different sections to retrieve
the following information:
• Display that summarizes all load segment-relevant input and
output parameters, including the information on operation status, the
current load and the currently available battery capacity
• Messages and alarms
• Battery display with status window and state of charge
The display indicates the current UPS status in the top middle section.
Here is a list of the symbols used and what they mean:
continuous double-
conversion mode. Power
supply is available and
within the acceptable
tolerance range
(Mode: “High
performance”).
To Next Page
Loading...
