AM Series Boiler Heat Exchanger Maintenance & Replacement
Technical Instruction Document
5.5: Turning On Water and Return to Service
Turning On Water and Return to Service
1. Turn OFF the drain valves of the water supply and return headers by turning both knobs
clock-wise. See Figure 5-11.
Figure 5-11: Turn OFF the Drain Valves of Supply and Return Headers
2. Turn ON the water supply and return pipe valves. See Figure 5-12.
Figure 5-12: Turn ON the Water Supply and Return Pipe Valves
3. Visually inspect the supply and return connections at the front of the boiler for water leaks.
4. If there are no water leaks, close the front panel door and affix with screw on left side.
5. Refer to Section 2.4, and by reversing the instructions, reinstall front, bottom, and top covers
to the unit.
6. The AM unit may now be returned to service.
TURN WATER DRAIN
VALVES: OFF
ON
TID-0132_99 AERCO International, Inc. • 100 Oritani Dr. • Blauvelt, NY 10913 Page 34 of 36
Ph.: 800-526-0288 01/18/2015
To Next Page
Loading...
Need help?
General