27
functioning mode (cooling-heating) and
display of the alarms summary. After a
power cut, the unit can re-start automa-
tically keeping the original settings.
PRD0 (Accessory not supplied)
Remote panel, controls the unit and can be remote controlled up to 50 m.
For distances exceeding 50 m, contact the head office
Regulation features
The unit control panel allows quick set-
ting of the machine functioning para-
meters and their display. The display is
made up from a matrix with 4 lines x 20
columns in order to signal the type of
functioning, displaying set parameters
and any alarms that have intervened. All
default settings and any modifi cations
are memorised in the board. With the
installation of the PGD0 remote panel
accessory, it is possible to command
switch-on/off at a distance, setting of the
p-Lan remote connections
User interface
Panel on board the machine
To Next Page
Loading...
