AERMEC VXT - MAIN menu - PAGE 26; SET-POINT MENU parameters; SET POINT menu - PAGE O

41
MAIN menu - PAGE 26
Visualisation on unit display Index Display/Parameter
A Functioning hours display: This page displays the number of
functioning hours of the heat pump.
B Page index: Identifies the menu and the corresponding page:
P = MAIN menu
S = SET-POINT menu
M = MAINTENANCE TECHNICIAN menu (Blocked)
C = MANUFACTURER’S menu (Blocked)
CK = CLOCK menu
The number associated to one of the previous codes, indicates
the page of the menu indicated.
C Winter functioning hours counter: Indicates the number of
functioning hours in winter mode.
D Summer functioning hours counter: Indicates the number of
functioning hours in summer mode.
E DHW functioning hours counter: Indicates the number of fun-
ctioning hours in DHW mode.
F
Reset hours counter: by selecting RsY and confirming with
the enter key, the winter, summer and DHW values are reset.
SET-POINT MENU parameters
SET POINT menu - PAGE 0
Visualisation on unit display Index Display/Parameter
A SET-POINT menu: Indicates, by writing on the display, whether
the compensation on the set-points is active or not.
B Page index: Identifies the menu and the corresponding page:
P = MAIN menu
S = SET-POINT menu
M = MAINTENANCE TECHNICIAN menu (Blocked)
C = MANUFACTURER’S menu (Blocked)
CK = CLOCK menu
The number associated to one of the previous codes, indicates
the page of the menu indicated.
Parameters that can be modified by the user
Runnig Hours P26
Heating 000000
Cooling 000000
Sanitary 000010 RsN
A B
C
D
F
E
Setpoint menu' S0
The offset by
exthernal air
working
A A