AERMEC VXT - Selecting the type of circuit to the condenser (geothermy or well water); Selecting the presence;absence of a system storage tank; Selecting the position of the regulation probe (storage tank or system); Selecting presence;absence of an external air probe

29
4
Selecting the type of circuit to the condenser (geo-
thermy or well water)
The following operations must be performed:
• Press key B;
• Hold down key C or A to set the selection;
• Press key B to confirm;
• Press key C to pass to the next window;
5
Selecting the presence/absence of a system
storage tank
The following operations must be performed:
• Press key B;
• Hold down key C or A to set the selection;
• Press key B to confirm;
• Press key C to pass to the next window
6
Selecting the position of the regulation probe (stora-
ge tank or system)
The following operations must be performed:
• Press key B;
• Hold down key C or A to set the selection;
• Press key B to confirm;
• Press key C to pass to the next window;
7
Selecting presence/absence of an external air probe
• Press key B;
• Hold down key C or A to set the selection;
• Press key B to confirm;
• Press key C to pass to the next window;
Prg
Esc
The unit is:
1.Geother.20% Glyc
A
B
C
I3
2.Geother.10% Glyc
3.Well water 3
Prg
Esc
The unit use the
A
B
C
I4
plant tank ? Yes
Prg
Esc
The probe uses in
A
B
C
I5
regulating the
Noaccumulation?
Prg
Esc
The unit has the
A
B
C
I6
probe outdoor air?
Yes