AERMEC WRCB - User Notice and Precautions; General Operation Warnings

4
USER NOTICE
— Never install the wired controller in the moist circumstance or expose it directly under the sunlight.
— Never beat, throw, and frequently disassemble the wired controller and the wireless remote controller.
— Never operate the wired controller and the wireless remote controller with wet hands.
— Do not remove or install the wired controller by yourself. If there is any question, please contact our after-sales service center.
— The wired controller is a general model, applicable for several kinds of units.Some functions of the wired controller are not available for certain kinds of units, more details
please refer to the owner’s manual of unit. The setting of such unavailable function will not aect unit’s operation.
— The wired controller is universal. The remote receiver is either in the indoor unit or in the wired controller. Please refer to the specic models.
— As for some indoor units connected with the wired controller, if use the remote controller whose set temperature is adjustable under auto mode, the wired controller will
receive the mode signal of remote controller, rather than its set temperature under the auto mode.
— The wired controller is the universal component. When indoor unit has connected with the wired controller, display status of indoor unit is decided by the indoor unit. Valid
status and invalid status are all belong to normal status.
Please read the manual carefully before using and installing this product.