AgfaPhoto Optima 145 - Panorama Mode

AgfaPhoto OPTIMA 145 AgfaPhoto OPTIMA 145
30 31
AgfaPhoto OPTIMA 145 AgfaPhoto OPTIMA 145
Panorama mode
Panorama Mode allows you to create a panoramic picture.
The camera will create a panoramic photo by stitching
individual images taken in panorama mode.
Follow these steps to create a panoramic picture:
1. Press the Mode button and use the Left/Right button
to select Panorama mode, then press the
button to
confirm the setting.
2. Use the Left/Right button to select the direction of
image stitching, e.g. left to right or right to left. Then
press the
button to confirm the setting; if no
selection is made the camera will default to left to right
stitching after 2 seconds.
3. After the first shot is taken, two target icons will
appear on the left and right side of the LCD screen.
Pan the camera and the circle icon on the screen will
move towards the square frame icon. When the circle
icon and square frame become green after overlapping,
the camera will capture the next picture automatically.
Repeat the same step for the third picture to finish the
stitching.
The camera will then stitch the pictures into a panorama
automatically. Press the playback button to enter Playback
mode and review the panorama result.
After selecting Panorama mode, Flash, Self-timer,
Macro mode and Exposure Compensation can not be
adjusted.
Before end
ing the shooting sequence, pressing the
Delete button will cancel the shooting sequence.
Panorama mode can stitch 2 or 3 pictures total.