AgfaPhoto Optima 145 - ConnectNg to a PC; SettNg the USB Mode; TransferrNg FLes to Your PC

66 6766 67
AgfaPhoto OPTIMA 145 AgfaPhoto OPTIMA 145
Connecting to a PC
Use the USB cable supplied with your camera to copy
(transfer) pictures to a computer.
Setting the USB mode
Since the camera’s USB port can be set to connect with
either a PC or a Printer, the following steps will allow you to
ensure that the camera is correctly configured to connect
with a PC.
1. Go to the camera setting menu, select USB connection
with the Up/Down button, and press the Right button.
2. Use the
Up/Down
nav
igation buttons to select
PC
.
3.
Press the
button to confirm the setting.
Transferring files to your PC
The computer will automatically detect the camera as a
removable drive. Double-click
My Computer
icon on the
desktop to locate the removable drive and to copy the
folders and files in the drive to a directory on your PC as
you would copy any typical folder or file.
By using the USB cable, you can transfer the captured
photos and videos to a PC. Follow the steps below to
connect the camera to a PC.
1.
Make sure both the camera and PC are turned on.
2. Connect one end of the supplied USB cable to the USB/
AV OUT port on your camera.
3.
Connect the other end of the cable to an available USB
port on your PC.