In any of the above Still Picture Modes, press the
button to go to the Still Picture menu.
To adjust each setting:
1.
In the Still Picture Menu, press Left/Right buttons to
switch between different Photo and Camera Setup
pages.
2. Press the Up/Down buttons to select the function.
3. Press
or Right button to enter the submenu.
4. Press Up/Down button to select an option, or press
Left button to return to the menu.
5. Press
button to confirm the setting and return to
the previous layer.
After selecting a function, you can press the Up
button to return to the Still Picture menu for other
Photo Setup or Camera Setup pages. Or you can
press the Down button several times to move to the
next setup menu page.
Refer to the following pages for more details about each
setting.
To Next Page
Loading...
