AgfaPhoto OPTIMA 3 - Basic Operation; Shooting in Auto Mode; Using the Zoom Function

18 1918 19
AgfaPhoto OPTIMA 3 AgfaPhoto OPTIMA 3
Your camera is equipped with two types of zoom:
optical zoom and digital zoom. Use zoom control
at the top of the camera to zoom in or out on your
subject while taking pictures.
W
T
Zoom indicator
(See “Digital
Zoom“ on page
47)
When the optical factor reaches its maximum value,
it stops momentarily. Release and push the zoom
wheel again, and the optical zoom will switch over
to digital zoom automatically. After the adjustment,
the zoom indication scale hides immediately,
and the current zoom status is indicated by the
following symbol .
Shooting in Auto Mode
Auto mode is the easiest mode to take photos.
While operating in this mode, the camera
automatically optimizes your photos for best
results.
To start shooting, do the following:
1. Press
Power to turn the camera on.
2. In the Mode menu, select the Auto mode ( ).
3. Compose your picture on the LCD screen and
press the Shutter button halfway to focus on
the subject.
4. The focus frame in the middle of the LCD will
turn to green when the subject is properly in
focus.
5. Press Shutter fully to capture the image.
Using the Zoom Function
BASIC OPERATION