AgfaPhoto OPTIMA 3 - Transmission; Video System

66 6766 67
AgfaPhoto OPTIMA 3 AgfaPhoto OPTIMA 3
The video output signal can be switched to NTSC or
PAL to accommodate different regional standards.
The appropriate setting will vary between regions.
NTSC: USA, Canada, Taiwan, Japan, etc.
PAL:
Europe, Asia (excluding Taiwan), Oceania,
etc.
Note:
The TV output will not display properly if an
incorrect video system is selected.
Use this setting to determine your video system in
the current area.
1. Select the Video System in Connection
Transmission menu.
2. Use the Up/Down navigation buttons to select
NTSC or PAL. Then press the button to
confirm.
Video System
Transmission