AgfaPhoto OPTIMA 3 - Agfaphoto OPTIMA; Beep; LCD Brightness

60 61
AgfaPhoto OPTIMA 3 AgfaPhoto OPTIMA 3
61
AgfaPhoto OPTIMA 3
Beep
Use this setting to adjust the volume of beep when
buttons are pressed and change the tones for
Shutter button, self-timer, and power-on/power-off.
To change this setting:
1. Select the
Beep
setting from the
Setup
menu as
described previously.
2. Use the
Up/Down
navigation buttons to switch
between volume, shutter tone, key tone, self-
timer tone, and power tone fields.
3. Press the Right button, press the Up/Down
button to adjust volume and change tone, and
press the button to confirm setting.
LCD Brightness
Use this setting to adjust the brightness of your
LCD screen.
1. Select the
LCD Brightness setting from the
Setup menu as described previously.
2. Select auto or adjust the brightness level using
the Left/Right button, and press the button
to confirm the setting.