AgfaPhoto OPTIMA 3 - Connecting to a PC; Setting the USB Mode; Transferring Files to Your PC

66 6766 67
AgfaPhoto OPTIMA 3 AgfaPhoto OPTIMA 3
Connecting to a PC
Use the USB cable supplied with your camera to
copy (transfer) pictures to a computer.
Setting the USB Mode
Since the camera’s USB port can be set to connect
with either a PC or a Printer, the following steps
will allow you to ensure that the camera is correctly
configured to connect with a PC. The USB mode is
set to PC by default.
1. Go to the transmission menu, select USB
connection with the Up/Down button, and press
the Right button.
2. Use the
Up/Down
navigation buttons to select
PC
.
3. Press the button to confirm the setting.
Transferring Files to Your PC
The computer will automatically detect the camera
as a removable drive. Double-click
My Computer
icon
on the desktop to locate the removable drive and to
copy the folders and files in the drive to a directory
on your PC as you would copy any other folder or file.
By using the USB cable, you can transfer the
captured photos and videos to a PC. Follow the
steps below to connect the camera to a PC.
1. Make sure both the camera and PC are turned on.
2. Connect one end of the supplied USB cable to
the USB/AV OUT port on your camera.
3. Connect the other end of the cable to an
available USB port on your PC.