Solving Problems 7
16900 Series Logic Analysis Systems Installation Guide 133
Using the System Recovery Software
Restoring your system software might be necessary for the following
reasons:
• Hard drive failure.
• Virus in the system or unstable system.
• Intentional disk clean - for example if you are passing the system to
another team or returning it to a rental company and you do not want
any data left on it.
On a Legacy 16900 Series Logic Analysis System with Windows XP
installation
The legacy 16900 series of Logic Analysis systems have the Windows XP
operating system installed. These systems also have the Agilent Logic
Analyzer software preinstalled.
You will need to have a keyboard and a mouse connected.
Follow the instructions provided with the recovery CD or DVD that
accompanies your Logic Analysis system to restore your system software.
On a 16900 Series Logic Analysis System with Windows 7 Installation
The 16900 series of Logic Analysis systems with serial number of
MY51420101 or higher have the Windows 7 operating system installed.
These systems also have the Agilent Logic Analyzer software version 5.20
or later preinstalled. These systems do not have any recovery CD or DVD
in their shipment.
If you need to restore the logic analysis system software, you run the
recovery process on the hard drive of the system. This recovery process
uses the hidden partition on the hard drive to restore the hard disk drive
back to its original state in which it was shipped. When you run this
process, the recovered hard disk drive contains:
Running the recovery disks will reformat your hard drive. All data files and programs
will be overwritten. Save your data to a CD or to another machine before performing
this procedure.
To Next Page
Loading...
Need help?
General
