Contents ▲ 182 ▼ Index
If you need additional help, please refer to the Agilent 2100 Bioanalyzer Maintenance
and Troubleshooting Guide.
4 Select an assay for the chip run.
On the Instrument tab, click the Assay button.
– OR –
Click the Assays menu.
Both will open the Assays menu, allowing you to select an assay from the submenus.
Note that you can also select File > Open File to Run. This opens a dialog box, allowing
you to load either an assay (.xsy) or a chip data file (.xad).
The type of assay you have to select depends on the experiment and the staining
protocol you use to prepare your cell samples. Details on these assays are described in
the Application Notes available for each assay.
5 Select the desired assay, for example, Apoptosis.
The assay is loaded and its name appears on the Information Bar:
NOTE
After a chip run, the results can be evaluated using a different flow cytometric chip
data or assay file. Refer to “Importing Data Analysis Setpoints” on page 273.
To Next Page
Loading...
Need help?
General
