Contents ▲ 265 ▼ Index
How to Modify a Custom Assay
NOTE
You cannot save modifications to predefined assays such as Apoptosis or DNA 1000.
To modify a custom assay:
1 From the File menu select Open.
The Open dialog box appears.
2 Select an assay (.xsy) file and click Open.
The assay appears in the Tree View Panel and the Assay Properties Tab is displayed.
3 Modify the assay by making changes on the following tabs:
– Modify assay setpoints on the Assay Properties Tab.
– Modify or enter additional chip, sample, and study information on the Chip Summary
Ta b.
NOTE
The study description is stored in the 2100 expert system file. Altering the study
description of an assay will not affect the entries in the data files that were previously
generated from this assay. To update this information in the data files, too, they must
be opened, and the study must be assigned again.
– For flow cytometric assays, define or modify markers and regions on the Histogram
Tab (Single/Grid View) and Dot Plot Tab (Single/Grid View).
To Next Page
Loading...
Need help?
General
