Agilent Technologies 2100 User Manual

Contents ▲ 61 ▼ Index
To load the prepared chip into the Agilent 2100 bioanalyzer:
1 Open the lid and remove any chip.
2 Adjust the chip selector to position “1” as shown in the following figure.
These steps are required for inserting DNA, RNA, and Protein chips in the bioanalyzer.
Move chip
selector in
position “1”
To avoid using
incompatible chips and
cartridges, a chip selector
is installed in the
bioanalyzer. This ensures
that the chip matches to
the installed cartridge.

Agilent Technologies 2100 Specifications

General

Brand	Agilent Technologies
Model	2100
Category	Measuring Instruments
Language	English