Contents ▲ 74 ▼ Index
How to Navigate Through the Samples
At any time—even during a chip run—you can scroll through all samples—either in
electropherogram or gel view.
To navigate through samples using the Tree View Panel:
1 If the tree view is not visible, select View > Tree View.
The tree view panel appears to the left of the tabs, and shows all chip data and assay
files as nodes.
2 Click any sample name.
Electropherogram view: the electropherogram of the selected sample is shown in
single view
Gel view: the lane of the gel-like image corresponding to the selected sample is
highlighted.
To navigate through samples using the Lower Panel:
1 If the lower panel is not visible, select View > Lower panel.
The lower panel appears in the lower left corner.
2 Electropherogram view: Click any lane of the small gel image.
Gel view: Click any well on the chip icon.
To Next Page
Loading...
