Agilent Technologies 33120A - Triggering Commands; System-Related Commands

Default parameters are shown in bold.
Triggering Commands
(see page 186 for more information)
TRIGger:SOURce {IMMediate|EXTernal|BUS}
TRIGger:SOURce?
TRIGger:SLOPe {
POSitive|NEGative}
TRIGger:SLOPe?
*TRG
System-Related Commands
(see page 188 for more information)
DISPlay {OFF|ON}
DISPlay?
DISPlay:TEXT <quoted string>
DISPlay:TEXT?
DISPlay:TEXT:CLEar
SYSTem:BEEPer
SYSTem:ERRor?
SYSTem:VERSion?
*IDN?
*RST
*TST?
*SAV {0|1|2|3} State 0 is the instrument state at power down.
*RCL {0|1|2|3} States 1, 2, and 3 are user-defined instrument states.
MEMory:STATe:DELete {0|1|2|3}
Chapter 4 Remote Interface Reference
SCPI Command Summary
132