Agilent Technologies 33120A - SCPI Conformance Information; SCPI Confirmed Commands

SCPI Conformance Information
The Agilent 33120A Function Generator/Arbitrary Waveform Generator
conforms to the 1993.0 version of the
SCPI standard. Many of the
commands required by the standard are accepted by the function
generator but are not described in this manual for simplicity or clarity.
Most of these non-documented commands duplicate the functionality
of a command already described in this manual.
SCPI Confirmed Commands The following table lists the
SCPI-approved commands that are used by the function generator.
CALibration
[:ALL]?
:VALue <value>
:VALue?
DATA
:CATalog?
:COPY <
destination arb name> [,VOLATILE]
[:DATA] VOLATILE, <
value>,<value>, . . .
:DELete:ALL
:DELete[:NAME] <arb name
>
DISPlay
[WINDow][:STATe] {OFF|
ON}
[WINDow][:STATe]?
[WINDow]:TEXT:CLEar
[WINDow]:TEXT[:DATA] <quoted string>
[WINDow]:TEXT[:DATA]?
FORMat
:BORDer {NORMal|SWAPped}
:BORDer?
[SOURce]
:AM:DEPTh {<depth in percent>|MINimum|MAXimum}
:AM:DEPTh? [MINimum|MAXimum]
:AM:INTernal:FREQuency {<frequency>|MINimum|MAXimum}
:AM:INTernal:FREQuency? [MINimum|MAXimum]
:AM:SOURce EXTernal
:AM:SOURce?
SCPI Confirmed Commands
4
Chapter 4 Remote Interface Reference
SCPI Conformance Information
221