-113 Undefined header
A command was received that is not valid for the function generator.
You may have misspelled the command or it may not be a valid
command. If you are using the short form of the command, remember
that it may contain up to four letters. Example: TRIGG:SOUR BUS
-121 Invalid character in number
An invalid character was found in the number specified for a parameter
value. Example: *ESE #B01010102
-123 Exponent too large
A numeric parameter was found whose exponent was larger than
32,000. Example: BMOD:NCYC 1E34000
-124 Too many digits
A numeric parameter was found whose mantissa contained more than
255 digits, excluding leading zeros.
-128 Numeric data not allowed
A numeric parameter was received but a character string was expected.
Example: DISP:TEXT 123
-131 Invalid suffix
A suffix was incorrectly specified for a numeric parameter. You may
have misspelled the suffix. Example: SWE:TIME 0.5 SECS
-138 Suffix not allowed
A suffix was received following a numeric parameter which does not
accept a suffix. Example: BM:PHAS 10 DEG (this command does not
allow a suffix).
-148 Character data not allowed
A discrete parameter was received but a character string or a numeric
parameter was expected. Check the list of parameters to verify that you
have used a valid parameter type. Example: DISP:TEXT ON
Chapter 5 Error Messages
Execution Errors
230
To Next Page
Loading...
Need help?
General
