Laboratory Environment
28 Agilent 5100 and 5110 ICP-OES Site Preparation Guide
After the workbench vibration and location requirements have been met, check the
checklist box: Workbench requirements met.
After the bench space requirements have been met, check the checklist box: Sufficient
bench space is available for all components.
After the bench support requirements have been met, check the checklist box: Bench
can support system weight. See Page 31 for Weight and Dimension information.
PC Requirements
The minimum configuration represents the absolute minimum you
can run the software on. This PC configuration may be out of
manufacture, but you may want to use a PC you already have. The
recommended configuration is that which you would buy new.
Table 2. PC requirements
Minimum Recommended
2 GHz 64-bit (x86) quad core
processor or higher
3.2 GHz 64-bit (x86) quad core processor
or higher
4 GB of system memory 4 GB of system memory
120 GB hard drive with at least
15 GB of available space
500 GB hard drive
DVD-ROM Drive DVD-ROM Drive
Screen resolution of 1280x768
running in 96 dpi
22 inch screen with minimum screen
resolution of 1920x1080 running in 96 dpi
Ethernet port Ethernet port
Two USB 2.0 ports 4 USB 3.0 ports
6 USB 2.0 ports
Windows 7 Professional 64-bit Windows 7 Professional 64-bit
Higher rated PC components can be substituted for those listed above
for example, processor type, amount of memory, screen size and
resolution and operating system version.
To Next Page
Loading...
Need help?
General
