Accessories and Options
Agilent 5100 and 5110 ICP-OES Site Preparation Guide 49
6. Accessories and Options
For detailed instructions and site requirements see the
documentation supplied with the accessory.
Sample Preparation System (SPS 4) Autosampler
For safety information and to prepare the SPS 4 for installation,
please see the instructions that came with the accessory.
The SPS 4 is compatible with a wide range of commercially available
low-cost autoclavable sample racks.
Sample contamination from airborne particles is eliminated and
corrosive or toxic fumes are removed during sampling with the
optional environmental enclosure.
Sample Preparation System (SPS 3) Autosampler
For safety information and to prepare the SPS 3 for installation,
please see the instructions that came with the accessory.
The SPS 3 is compatible with a wide range of commercially available
low-cost autoclavable sample racks.
Sample contamination from airborne particles is eliminated and
corrosive or toxic fumes are removed during sampling with the
optional environmental enclosure.
Environmental Conditions
The SPS accessory is suitable only for indoor use. The site should be
selected to avoid dusty or corrosive atmospheres.
To Next Page
Loading...
