Installation
Agilent 5800 and 5900 ICP-OES User's Guide 19
3 Installation
Agilent ICP-OES Instrument Overview 20
Instrument Status LED Color Coding 22
Front Power On/Off Button 22
ICP Expert Software 23
Connecting ICP Expert software to the ICP-OES 24
Performing a Detector and Wavelength Calibration 24
Hardware Components Replacement 25
Torch Assembly and Disassembly 27
Accessories 35
The Agilent ICP-OES must be installed by an Agilent-trained, Agilent-qualified or
Agilent-authorized field service engineer.
You should have completed and returned the form in the Site Preparation Guide
stating that you have prepared the laboratory in accordance with the requirements
detailed in that manual. An Agilent representative will then arrange a suitable
installation date with you.
Details for unpacking the instrument and what to do in case it has been damaged
in transit are also outlined in the Site Preparation Guide.
To Next Page
Loading...
Need help?
General
