Operation
Agilent 5800 and 5900 ICP-OES User's Guide 45
NOTE
See the ICP Expert Help and Learning Center for a more detailed description of
setting up a method.
Running Samples
To run samples:
1 Set up the autosampler with all solutions, if required.
2 Click the Analysis tab and do the following:
a Ensure your samples are selected. This will be indicated by a check next
to the Rack:Tube column. To select all solutions, select the checkbox next
to the Rack:Tube title.
b Click the Run icon in the toolbar (or press the SHIFT+F8 keys) to begin the
analysis, and follow the prompts.
NOTE
For further information about running an analysis, refer to the ICP Expert Help and
Learning Center.
Printing a Report
To print a report:
1 Click Report on the toolbar or File > Report.
2 Choose whether you want to print or preview the report or save the report as a
PDF file.
TIP
Previewing the report allows you to ensure that you have included all of the data you
require.
3 Select a report template and then click Open.
To Next Page
Loading...
Need help?
General
