Agilent 7100 CE in Empower Environment 2
Contents
Introduction 3
Set up and Configuration of CE in Empower 3 5
CE Instrument set up 5
The CE Driver 5
Various Configuration Steps for CE in Empower 5
Using the CE in Empower 12
The CE Status Dashboard in Empower – Direct Control 12
Creating an Instrument Method 15
Replenishment and Conditioning 25
Indirect detection 28
Application of external pressure 28
Empower features for CE Instrument Control 33
Known Limitations/Not tested configurations: 33
Extended CE driver features available in Agilent OpenLAB CDS
ChemStation Edition 34
Additional Information 36
Waters 36
APPENDIX - Examples 37
Example: Single test run 37
Example: Multiple injections using the IQ Kit for CE 39
Example: Indirect detection using the Plating Bath Buffer 41
To Next Page
Loading...
Need help?
General
