Agilent Technologies 7100 Technical Note

Using the CE in Empower
26 Agilent 7100 CE in Empower Environment
NOTE
Refer to the G7100A User manual on the requirements for the bottles, as only specific
bottles can be used. For example, they need to be pressure-stable.
The waste bottle should be 500 ml, whereas the electrolyte bottle can also be a 100 ml
bottle. Both bottles are included in the accessory kit.
Following replenishment, tasks can be set up in the CE replenishment table
in the Instrument method:
 Empty vial: empties a vial into the waste bottle
 Fill vial: fills a vial to a user-selectable level from the electrolyte
reservoir
 Clean tubes: flushes the replenishment system to clean the tubes
 Replenish vial: empties a vial into the waste and fills it up from the
electrolyte reservoir
 Wait: waits for a specified time
Figure 19 Replenishment Table

Agilent Technologies 7100 Specifications

General

Brand	Agilent Technologies
Model	7100
Category	Laboratory Equipment
Language	English