Agilent Technologies 7697A Maintenance

23
Agilent 7697A Headspace Sampler
Maintenance
Agilent Technologies
3
Maintenance
To Clean the Sample Tray (12-Vial Model) 24
To Replace the Sample Tray Seals (12-Vial Model) 26
To Clean the Sample Tray Assembly (111-Vial Model) 27
To Clean the Oven (111-Vial Model) 29
To Replace the Sample Probe 34
To Replace the Sample Loop 37
To Replace the Sample Loop Adapters 42
To Replace the 6 Port Valve 45
To Replace the 6 Port Valve Rotor 46
To Clean the 6 Port Valve and Rotor 49
To Attach the Transfer Line to a Split Splitless or Multimode Inlet 50
To Attach the Transfer Line to a Volatiles Interface 52
To Attach the Transfer Line to a Purged Packed Inlet 55
To Attach the Transfer Line to a Cool On-Column Inlet 57
To Remove the Fused Silica Column from the Transfer Line 59
To Install a Fused Silica Column into the Transfer Line 61
To Use ProSteel Tubing 66
This section provides the basic maintenance procedures for
the Agilent 7697A Headspace Sampler.

Agilent Technologies 7697A Specifications

General

Brand	Agilent Technologies
Model	7697A
Category	Medical Equipment
Language	English