Maintenance 3
Maintenance 29
To Clean the Oven (111-Vial Model)
1 Gather the following:
• Lint- free gloves
• Lint- free wipes
• T- 20 Torx driver
• L- shaped 3- mm Hex wrench
• Needle nose pliers
• Shop vacuum
2 Set your GC oven, Headspace oven, and transfer line to
ambient temperatures and wait for them to cool.
3 Once the GC oven, Headspace oven, and transfer line have
cooled to ambient temperature, turn the Headspace off
and unplug the power cord.
4 Turn all gas flows off at their sources.
5 Remove the tray assembly. See “To Remove the Tray
Assembly (111- Vial Model)”.
6 Remove the pneumatics assembly. See “To Remove the
Pneumatics Assembly”.
Be careful! Certain parts may be hot enough to cause burns. If hot,
wear heat-resistant gloves to protect your hands.
To Next Page
Loading...
