28 Maintenance
3 Maintenance
3
Remove the tray assembly from the Headspace. See “To
Remove the Tray Assembly (111- Vial Model)”.
4 Clean the tray assembly using a lint- free cloth.
a Wipe away any spills on the surfaces of the tray
assembly.
b Clean the priority sample area.
c Clean inside the vial cooling position.
d Cean inside the bar code reader position if applicable.
e Wipe away any residue on the gantry and gripper
fingers.
5 Clean the Headspace tray surface of any spills or broken
glass that may have fallen through the tray assembly base.
a Clean any broken glass on the Headspace tray surface
using a vacuum cleaner.
b Wipe away any spills from the tray surface using a
lint- free cloth.
Reassembly is the reverse of these steps.
To Next Page
Loading...
Need help?
General
