Removing Covers and Components 2
Maintenance 17
To Remove the Valve Cover
1 Gather the following:
• T- 20 Torx driver
2 Remove the pneumatics front cover. See “To Remove the
Pneumatics Front Cover”.
3 Remove the valve thermal enclosure. See “To Remove the
Valve Thermal Enclosure”.
4 Completely loosen the two T- 20 Torx captive screws on
the valve cover (Figure 9).
Figure 9 Valve cover
5 Remove the valve cover.
Reinstallation is the reverse of these steps.
To Next Page
Loading...
