Operating Basics 2
Operating Guide 23
Instrument Control
The Agilent 7820A GC is typically controlled by an attached
data system such as Agilent EZChrom Elite Compact.
Alternately, the GC can be controlled entirely from a
software keypad, with output data being sent to an attached
integrator for report generation.
Agilent Data System Users – Please refer to the online help
included in the Agilent Data System for details on how to
load, run, or create methods and sequences using the data
system.
Standalone GC Users – If you are running your GC without
an attached data system, for details on loading methods and
sequences from the software keypad see:
• “To Install the Software Keypad”
• “To load a method”
• “To load a sequence”
For details on running methods and sequences from the
software keypad see:
• “To manually inject a sample with a syringe and start a
run”
• “To run a method to process a single ALS sample”
• “To start running a sequence”
Refer to the Advanced User Guide for details on how to
create methods and sequences using the software keypad.
To Next Page
Loading...
Need help?
General
