47
Agilent 7820A Gas Chromatograph
Operating Guide
Agilent Technologies
4
Running a Method or a Sequence from
the Software Keypad
Loading, Storing, and Running Methods from the Software Keypad 48
Loading, Storing, and Running Sequences from the Software Keypad 50
This section explains how to load, store, and run a method
or sequence using the software keypad, without the use of
an Agilent data system. The keypad can be used to select
and run a method or automated sequence stored in the GC
and run it. In this case, the data generated from the run is
normally sent to an integrator for the data analysis report.
For information on creating a method or sequence using
keypad entry, see the Advanced User Guide.
To Next Page
Loading...
Need help?
General
