Agilent Technologies 81133A User Manual

How to Change a Number Field Operating the Agilent 81133A/81134A Pulse Generator
Agilent 81133A/81134A Pulse Generator User’s Guide, August 2002 25
3 Press and rotate the navigation knob to set the least significant digit
to change.
NOTE This method is useful for fine-tuning. It also changes the values in real-
time, so that you can immediately see the changes at the output.
4 Rotate the navigation knob to change the value.
5 Press the navigation knob once when you are done.
Changing Single Digits
NOTE This procedure can also be used to change the unit of the parameter.
1 Focus at the number field by rotating the navigation knob to the
desired position.
2 Press and rotate the navigation knob to select the digit (number or
unit).
NOTE You can also press the arrows next to navigation knob.
3 Release the navigation knob.
Now when you rotate it, the number (or the unit) changes.
4 Press the navigation knob to set the number (or the unit).
You can now see the changes at the output.
Press
PressPress
Press
Press
PressPress
Press
Press
PressPress
Press

Agilent Technologies 81133A Specifications

General

Brand	Agilent Technologies
Model	81133A
Category	Pulse Generator
Language	English