Agilent Technologies 83640B User Manual

assign softkey, A-22
attenuator, uncouple, U-1
attenuator uncouple, M-14
attenuator, value set, S-59
auto ll increment, A-23
auto ll number of points, A-24
auto ll start, A-25
auto ll stop, A-26
automatically set sweep time, S-76
automatic sweep time, 1-10
automatic trigger, stepped sweep, S-69
auto track, A-27
auto track failed message, 2a-1
auxiliary interface connector, C-6
auxiliary output connector, C-5
B
bandwidth
ALC, A-9, A-10, A-11
AM, A-12, A-13
amplitude mo dulation, A-12, A-13
beginning frequency
atness correction, A-25
frequency list, A-25
bits
in general status register mo del, 1-106
summary bit in general status register mo del, 1-107
blank display, B-1
BNC connectors, C-4
Boolean parameters
discussed in detail, 1-85
explained briey, 1-75
brackets, angle, 1-64
BUS
trigger source dened, 1-119
C
cabinet, clean, 4-5
cables
GPIB, C-7
calco fail, F-3
calibrate sweep span always, S-74
calibrate sweep span once, S-75
calibration
full user, F-19
sweep span, F-15
calibration failed message, 2a-2
calibration, user functions, U-3
calman fail, F-4
calYO fail, F-4
center frequency, 1-8, C-1
CW coupled, C-13
center frequency marker, C-1
CF/span sweep mo de, zo om, Z-1
change correction value, C-3
change interface address, 3-8
Index-3

Agilent Technologies 83640B Specifications

General

Brand	Agilent Technologies
Model	83640B
Category	Portable Generator
Language	English