Arrow Keys
Function Group
ENTRY
Menu Map
NONE
Description
This group of entry keys lets you manipulate numerical values in the
active entry line.
4
(
5
and
4
)
5
arrow keys identify (by underlining) the digit to be
changed. For example, if CW frequency is in the active entry line,
and the display indicates:
--> CW: 10005.000000 MHz
You may wish to change the 5 to a 6. Press the
4
)
5
ve times until
the underline is under the 5. Now use the rotary knob or the
4
*
5
to change the 5 to a 6. The underlined digit remains the active
character in this function until the swept signal generator is preset,
turned o, or the underline is moved completely left or right.
The
4
*
5
and
4
+
5
arrow keys increment or decrement the numeric
value by a predetermined amount. The incrementvalue depends on
the active function and the step value set. All incrementvalues are
defaulted to their original values when the swept signal generator
is preset (unless
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
Preset Mode User
has dened the default
dierently).
Programming Codes
SCPI:
NONE
Analyzer:
NONE
See Also
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
Fltness Menu
,
NNNNNNNNNNNNNNNNNNNNNNNNNNNNN
List Menu
\Entry Area" in Chapter 1
\Creating and Applying the User Flatness Correction Array" in
Chapter 1
A-22 Operating and Programming Reference
To Next Page
Loading...
Need help?
General
