1a-7
Operation Examples
Using the Memory Registers
Using the Memory Registers
The memory register examples show you how to crate a sequence of registers, delete a
register from that sequence, renumber the registers in the sequence, and insert a new
register in the sequence.
Up to 10 register sequences can be defined (0 through 9). A sequence can contain up to 100
registers (00 through 99). There are a total of 300 registers available in the instrument.
The registers can be used in the sequences in any combination 9such as 10 sequences of 30
registers each, or 3 sequences of 100 registers each) as long as the total does not exceed
300 registers. It is not possible to have all 10 sequences each contain 100 registers as that
would be 1000 registers. (If Option 1EP is present, there are a total of 70 registers
available.)
To Next Page
Loading...
Need help?
General
