1a-12
Operation Examples
Using the Memory Registers
3. Step through the remaining registers in sequence 0.
The deleted register number has been removed from the sequence. Note that the
instrument does not renumber the registers when one is deleted.
Renumbering the Registers in a Sequence
In this example, you will eliminate the skip from register 00 to register 02 in sequence 0
caused when you deleted register 01 in the previous example.
Decreasing the Register Number
1. Delete register 02.
The settings saved in register 02 are recalled when it is deleted.
2. Save the settings from register 02 into register 01.
To Next Page
Loading...
Need help?
General
