1a-10
Operation Examples
Using the Memory Registers
Checking the Sequence
8. Recall the registers in sequence 0.
The ⇑ and ⇓ keys recall registers or sequences depending on which key was pressed last
(
REG or SEQ).
Checking a Different Sequence
9. Select sequence 1.
10.Step through the registers in sequence 1 if there are registers saved in it.
NOTE Sequence 1 does not contain the settings you saved in sequence 0. The
instrument enables you to save different settings in each sequence to create
up to ten different sequences for your testing. Remember when you save or
recall a register, be sure that the correct sequence is also selected.
To Next Page
Loading...
Need help?
General
